Siser EasyWeed Electric Heat Transfer Vinyl

Electrify Your Look with Unique Finishes

If you’re looking to make your designs pop then EasyWeed Electric has a finish just for you! You’ve never seen a heat applied material like EasyWeed Electric. The colours are vibrant with a pearlescent metallic sheen. EasyWeed Electric comes on a pressure-sensitive carrier which makes cutting detailed designs and logos a breeze. EasyWeed Electric is durable wash after wash and maintains its bright colour and brilliant finish. If you’re looking to provide multi-colour designs, EasyWeed Electric can be layered.

Cutter Settings

Remember to cut your design in reverse.

Cricut®:

Blade: Standard
Setting: Iron-on

Silhouette Cameo:

Blade: Standard, 3
Setting: Heat Transfer Material (Smooth)
Speed: 8
Thickness: 6

Brother:

Blade: 2
Cut Speed: 1
Cut Pressure: 1

Application Instructions

Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with baking paper or a teflon sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 15-10 seconds
• Peel carrier hot or cold

Application Instructions (heat press)
• Preheat garment for 2-3 seconds
• Apply design at 150°C
• Use medium pressure for 15 seconds
• Peel carrier hot or cold

Recommeded Use and Care 

EasyWeed Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean