Siser Heat Transfer StripFlock Pro Vinyl

The Only Flock in the Industry that can be Layered On Itself.

A great alternative to embroidery, StripFlock heat transfer vinyl gives logos a raised, textured, suede-like feel. The deep, opaque colours make StripFlock excellent for retro designs or anytime you want a rich look. StripFlock looks excellent on caps, bags, and garments that need textured visual interest. Use Stripflock as a base layer and cover with other materials or more StripFlock! The ability to layer this material allows you to say “yes” to multi-colour designs.

Cutter Settings

Remember to cut your design in reverse.

Cricut Maker:

Blade: AutoBlade, Fine-Point
Setting: Heat Transfer (Non-Cricut)

Silhouette Cameo:

Blade: Standard, 3-4
Material: Heat Transfer, Flocked
Speed: 5
Force: 6

Brother:

Blade: Standard, 4
Cut Speed: 5
Cut Pressure: 2

Application Instructions

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with baking paper or a teflon sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)
• Preheat garment for 2-3 seconds
• Apply design at 155°C
• Use medium pressure for 15-20 seconds
• Peel carrier warm (at least 10 seconds off press)

Recommeded Use and Care 

StripFlock Pro Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean